9
MIDI Function:
1. Press and hold the MIDI button for 3 seconds to enter MIDI Mode.
2. Use the Speed fader to set the MIDI channel. You can choose CH1-16.
3. Press and hold the MIDI button for 3 seconds to exit Midi Mode.
The MIDI function can be used to link 2 LED commanders together or use a MIDI keyboard to control the
playback of the LED commander.
AUX Button:
1. In Patch Mode the AUX button can be patched to any DMX value from 1-66.
2. The AUX button can be used in scenes and chases.
3. To override the program setting you can press one of the AUX buttons.
4. This will stay overridden unless you press the MIDI button to revert back to the original program.
Speed and Fade Function:
You can set the speed and fade time whilst running chase.
You can override your manual settings of the fade slider by pressing the Record button. (This simply sets the
fade slider to 0).
Maintenance:
The COBRA Colour Control 8 requires almost no maintenance. However you should keep the unit clean.
Disconnect the mains power supply and then wipe the cover with a dry cloth. Do not immerse in liquid. Do
not use alcohol or solvents.
Keep connections clean. Disconnect electric power and then wipe the DMX and audio connections with a dry
cloth.
Troubleshooting for the COBRA Colour Control 8:
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out the
following steps:
1. Fixture does not respond to controller: Check the DMX address of the fixture and the controller. Make
sure they are correct. Make sure the connections are correct.
2. Interference between chases: If the same channel is assigned to different running chases, the one with
the highest channel value will be put out.
3. If the device does not operate properly disconnect the mains power.
4. Check all power connections and other cables.
5. If all of the above appear to be okay plug the unit in again.
6. If nothing happens after 30 seconds unplug the device.
7. If none of the above work consult your dealer.
(19 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales