Cobra Colour Control 12 Manual de usuario descargar pdf (Pagina 5)

Controller Rear:

25. DMX OUT.

26. DMX Polarity Switch.

27. USB Light.

28. Audio Input: This RCA accepts a line level audio input signal ranged from 100mV to 1Vpp.

29. MIDI Thru: MIDI port for connection to a sequencer or MIDI device.

30. MIDI Out: MIDI port for connection to a sequencer or MIDI device.

31. MIDI In: MIDI port for connection to a sequencer or MIDI device.

32. DC power DC 9-12V 800mA.

33. ON/OFF.

First Time Operation:

1. Remove all packaging materials.

2. Connect a DMX cable from the controller to the first light then from the first light to the second. Do this

until all 8 lights are connected to the controller.

3. Plug the controller in to the mains using the supplied AC/DC power supply then plug your 8 LED lights in

to the mains.

4. A DMX address will need to be set on each light. The first light goes to DMX address 1, the second to

DMX address 9, the Third to DMX address 17, the 4th to DMX address 25, the fifth to DMX address 33,

the sixth to DMX address 41, the seventh to DMX address 49 and the eighth to DMX address 57. (Some

LED lights will have digital displays and some will have small dip switches).

5. Check Blackout light is not lit. If it is press the Blackout button.

6. Make sure the Fade slider is to the bottom.

7. If your DMX lights are 4-channel and have the DMX layout as red, green, blue and dimmer, you can

press fixture buttons 1-8 then slide faders red, green, blue & colour up then all 8 lights should light up. If

you wish to keep things simple you can ignore strobe, sound, dimmer & master faders and use

colour fader as your dimmer slider.

8. Follow the rest of the manual for all programming options plus advanced settings.

Enter Program Mode:

1. Press and hold the Record button for 3 seconds. The LED next to the button will light up red.

Exit Program Mode:

1. Press and hold the Record button for 3 seconds. The LED next to the button will switch off.

25 26 27 28 29 30 31 32 33

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Cobra Colour Control 12 Manual de usuario Pagina 5