Cobra Colour Control 12 Manual de usuario descargar pdf (Pagina 3)

Protection from Fire:

1. Do not place near sources of heat.

2. Do not block any ventilation holes.

3. Check your AC wall socket will take the load you are applying to avoid any overloading.

4. Make sure you are using the correct voltage DC power supply, set to the correct polarity.

Protection from Injury and Damage:

1. Never try to modify this unit.

2. Always install the unit in a suitable location where vibrations to the unit are avoided.

3. Check this unit matches the mains voltage and frequency before plugging it in to your mains socket.

4. If any liquids or objects have entered the unit, switch it off immediately and consult a qualified engineer.

5. If the unit malfunctions or there is damage to the mains cable, disconnect immediately and consult a

qualified engineer.

6. All parts should be replaced with genuine spare parts and carried out by a qualified engineer.

Unpacking:

1. The box should contain Colour Control 4, DC power supply, 19” rack kit and user manual.

2. If there is any damage or missing parts, please contact your dealer immediately.

Specifications:

Name: Colour Control 4

Code: Control 4

Power Supply: DC 12v 500mA

Power Consumption: 20 watts

Output: DMX 512 (3-pin XLR)

Size: 372 x 156 x 58mm

Weight: 1.74kg (1.90kg including 19” rack kit)

Features:

The Colour Control 4 is a DMX controller suitable for independent control of four 4-channel LED par cans.

Features include:

1. Controls 4 RGB LED fixtures.

2. Up to 16 scenes can be stored.

3. Up to 16 chases can be stored.

4. A chase can contain up to 99 steps.

5. 16 chases can contain a maximum of 392 steps in total.

6. Chases can be run with adjustable speed.

7. Chases can be run with adjustable fade.

8. Chases can be run to the beat of the music.

9. Strobe functions on scenes and chases.

Note: An understanding of DMX is required to fully use this product.

1 2 3 4 5 6 7 8

Sin comentarios

Cobra Colour Control 12 Manual de usuario Pagina 3